Blackboard

£2.20£10.00

Thin PU heat transfer vinyl (HTV) with adhesive polyester backing. Blackboard surface has been specially created for chalk writing. It can be easily washed and rewritten infinite times. The material grants easy cutting, weeding and application.

 

SKU: BB0019 Category:

Description

Write it, Wipe it, Repeat! Now you can turn any fabric into a writable surface that can be used over and over again. Blackboard heat transfer vinyl by Siser, transforms plain materials into a walking chalkboard without making you feel like a walking sandwich board Lightweight and super soft, Blackboard is unlike any HTV you’ve ever experienced. This revolutionary material only needs 135°C of heat with medium pressure for just 15 seconds to create a machine washable chalkboard  with a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials.

Compatible with standard chalk, blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organise, and customise with Blackboard heat transfer vinyl.

***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.

Media should be loaded in your machine with the dull side uppermost.

MIRROR YOUR DESIGN

HTV Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Iron On
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Self Adhesive Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Vinyl
Blade: Standard, 2-3
Material: Vinyl
Speed: 7
Force: 5
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

HTV Application Instructions

Applies To:

• 100% cotton
• Poly/cotton blends
• 100% polyester, elastan

Application instructions (home iron)
DO NOT USE STEAM
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds

Laundering:

• Wait 24 hours before 1st wash
• Machine wash 60°C Max / Mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach

The product is REACH compliant

This HTV is certified to OEKO-TEX Standard 100 Class 1

Product class I:
Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)

The product is certified VeganOK

Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark

Weight 0.03 kg
Dimensions 31 × 21 × 0.03 cm
Size

A4, Metre, Midi Roll, Mini Roll

Go to Top