P.S. Lumen

£6.30£21.75

White polyurethane heat transfer vinyl that casts a great glow when the lights are out. It cuts and weeds like our popular P.S. Film – Easyweed heat transfer vinyl. Ideal for decorating costumes, holiday t-shirts, or any garment that needs to stand out in the dark.

Charge the material by exposing to sunlight!

SKU: Lumen Category:

Description

EasyWeed Glow looks great in the daylight and glows in the dark! This polyurethane heat transfer vinyl is available in white and glows green!
It cuts and weeds like our popular EasyWeed heat transfer vinyl.
To get the glow effect, “charge” the material by exposing it to sunlight.
The more light you give it, the brighter and longer it glows in the dark!
Glow is great for crafters looking to create costumes, candy bags, and cool blanket forts that shine at bedtime. EasyWeed Glow can even be layered on other Siser® materials for an awesome look.
Layering EasyWeed Glow on top of white EasyWeed lets you create hidden messages and effects that reveal themselves in the dark!

***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.

Media should be loaded in your machine with the dull side uppermost.

MIRROR YOUR DESIGN

HTV Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Iron On
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Self Adhesive Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Vinyl
Blade: Standard, 2-3
Material: Vinyl
Speed: 7
Force: 5
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

HTV Application Instructions

Applies To:

• 100% cotton
• Poly/cotton blends
• 100% polyester, elastan

Application instructions (home iron)
DO NOT USE STEAM
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds

Laundering:

• Wait 24 hours before 1st wash
• Machine wash 60°C Max / Mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach

The product is REACH compliant

The product is certified VeganOK

Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark

Weight N/A
Dimensions N/A
Size

A4, Craft Metre, Metre, Midi Roll, Mini Roll

Go to Top