Plotter cut flex material, with a soft and very thin finish, available in a wide range of colours.
Its peculiar composition allows the overlaying of P.S. Film directly on P.S. Film, or of Stripflock on P.S. Film, so offering an endless blend of colours and effects.
Vibrant colours, easiness of use, one-step application, hot or cold peeling, reliability in colour fastness and washing resistance are the main features making the P.S. line one of the most favourite products currently available on the market.
EasyWeed® Purple
£2.10 – £8.12
Description
Siser P.S. EasyWeed
Heat Transfer T-Shirt Vinyl for Garment Decoration
Premium T-shirt vinyl, excellent for single and multi-layer applications with its easy to cut/weed, hot peel and very soft thin finish making (EasyWeed) our number one cad cut garment vinyl.
Compatible Fabrics: 100% polyester, 100% cotton, All poly/cotton blends
***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.
Media should be loaded in your machine with the dull side uppermost.
MIRROR YOUR DESIGN
HTV Cutting Settings
| Cricut: | Silhouette Cameo: | Scan N Cut: |
| Blade: Standard Setting: Iron On |
Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 |
Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
| Roland GS/GX-24: | Graphtec: | MH, SC2, LP3, and Titan 1: | Titan 2 & 3: |
| Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s |
Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
Self Adhesive Cutting Settings
| Cricut: | Silhouette Cameo: | Scan N Cut: |
| Blade: Standard Setting: Vinyl |
Blade: Standard, 2-3 Material: Vinyl Speed: 7 Force: 5 |
Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 2 |
| Roland GS/GX-24: | Graphtec: | MH, SC2, LP3, and Titan 1: | Titan 2 & 3: |
| Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s |
Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
HTV Application Instructions
Applies To:
• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
• Lycra®/spandex
| Application instructions (home iron) DO NOT USE STEAM • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold • Cover and reheat for 2-3 seconds |
Laundering:
• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach
The product is REACH compliant
This HTV is certified to OEKO-TEX Standard 100 Class 1
Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)
The product is certified VeganOK
Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | A4, Craft Metre, Metre, Midi Roll, Mini Roll |
