Electric – Lens Silver

£2.50£9.40

Electrify your designs with unique finishes!

SKU: E0032 Category:

Description

Plotter cut material with “electric” effect with adhesive polyester backing.. Compatible Fabrics: 100% polyester, 100% cotton, All poly/cotton blends (not for dye sublimated fabrics) ***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.

Media should be loaded in your machine with the dull side uppermost.

MIRROR YOUR DESIGN

HTV Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard Setting: Iron On Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies

Self Adhesive Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard Setting: Vinyl Blade: Standard, 2-3 Material: Vinyl Speed: 7 Force: 5 Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 2

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
HTV Application Instructions
Applies To: • 100% cotton • Poly/cotton blends • 100% polyester, elastan • Lycra®/spandex
Application instructions (home iron) DO NOT USE STEAM • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold Application Instructions (heat press) • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold • Cover and reheat for 2-3 seconds
Laundering: • Wait 24 hours before 1st wash • Machine wash 60°C Max / Mild detergent • Dry on normal dryer setting • Do not dry clean or bleach

The product is REACH compliant

This HTV is certified to OEKO-TEX Standard 100 Class 1

Product class I:
Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)

The product is certified VeganOK

Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark

Weight N/A
Dimensions N/A
Size

A4, Metre, Midi Roll, Mini Roll

Go to Top