Electrify your designs with unique finishes!
Electric – White
£2.25 – £8.20
Description
Plotter cut material with “electric” effect with adhesive polyester backing..
Compatible Fabrics: 100% polyester, 100% cotton, All poly/cotton blends (not for dye sublimated fabrics)
***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.
Media should be loaded in your machine with the dull side uppermost.
MIRROR YOUR DESIGNHTV Cutting Settings
Cricut: | Silhouette Cameo: | Scan N Cut: |
Blade: Standard Setting: Iron On | Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 | Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
Roland GS/GX-24: | Graphtec: | MH, SC2, LP3, and Titan 1: | Titan 2 & 3: |
Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s | Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s | Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies | Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
Self Adhesive Cutting Settings
Cricut: | Silhouette Cameo: | Scan N Cut: |
Blade: Standard Setting: Vinyl | Blade: Standard, 2-3 Material: Vinyl Speed: 7 Force: 5 | Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 2 |
Roland GS/GX-24: | Graphtec: | MH, SC2, LP3, and Titan 1: | Titan 2 & 3: |
Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s | Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s | Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies | Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
HTV Application Instructions
Applies To:
• 100% cotton
• Poly/cotton blends
• 100% polyester, elastan
• Lycra®/spandex
Application instructions (home iron) DO NOT USE STEAM • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold | Application Instructions (heat press) • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold • Cover and reheat for 2-3 seconds |
Laundering:
• Wait 24 hours before 1st wash
• Machine wash 60°C Max / Mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach
The product is REACH compliant
The product is certified VeganOK
Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark
Weight | N/A |
---|---|
Dimensions | N/A |
Size | A4, Metre, Midi Roll, Mini Roll |