Hi5 Neon Raspberry

£2.25£7.20

Plotter cut flex material,  with a soft and very thin finish, available in a wide range of colours.
Its peculiar composition allows the overlaying of P.S. Film directly on P.S. Film, or of Stripflock on P.S. Film, so offering an endless blend of colours and effects.
Vibrant colours, easiness of use, one-step application, hot or cold peeling, reliability in colour fastness and washing resistance are the main features making the P.S. line one of the most favourite products currently available on the market.

SKU: 25052 Category:

Description

PU plotter cut heat seal material with adhesive polyester backing for low temperature and time of transfer.
The material is thin, elastic, soft to the hand and blends well into the textiles. Specifically conceived for polyester based “technical” fabrics eventually mixed with an addition of cotton and elastic fibres.
Low temperature application prevents undesirable effects such as glossiness, fibre damaging and decrease or loss of some of the specific features of the textile.

***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.

Media should be loaded in your machine with the dull side uppermost.

MIRROR YOUR DESIGN

HTV Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Iron On
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Self Adhesive Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Vinyl
Blade: Standard, 2-3
Material: Vinyl
Speed: 7
Force: 5
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

HTV Application Instructions

Applies To:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Lycra®/spandex
Application Instructions (heat press)

  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold
  • Cover and reheat for 2-3 seconds

Laundering:

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean or bleach

The product is REACH compliant

This HTV is certified to OEKO-TEX Standard 100 Class 1

Product class I:
Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)

The product is certified VeganOK

Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark

Weight N/A
Dimensions N/A
Size

A4, Metre, Midi Roll, Mini Roll

Go to Top