Horizontal Blended Full Rainbow Printed

£2.50£4.00

Clear
SKU: N/A Categories: ,

Description

Description

Sheet size: A4

Custom Printed Design
Please note as this is custom printed it falls outside of our same day dispatch service as minimum of 12hrs is required for the print to dry to prevent shrinkage, these items will be dispatched the next working day.

***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.

An Application Tape is required for this product, we sell a number of application tapes all can be reused that have carriers on the back just replace after each use to get the most from each piece

HTV Cutting Settings

Cricut:

Blade: Standard
Setting: Iron On

Silhouette Cameo:

Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1


Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s

MH, SC2, LP3, and Titan 1:

Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies

Titan 2 & 3:

Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

HTV Application Instructions

Applies To:

• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
• Lycra®/spandex

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds
Recommended Accessories and Care

 Recommended Accessories:

• TTD Easy Mask
• Weeder
• Squeegee
• Multipurpose Paper or
• Heat Transfer Cover Sheet

Laundering:

• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach

SA Cutting Settings

Cricut:

Blade: Standard
Setting: Vinyl

Silhouette Cameo:

Blade: Standard, 2-3
Material: Vinyl
Speed: 7
Force: 5

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2


Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s

MH, SC2, LP3, and Titan 1:

Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies

Titan 2 & 3:

Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

SA Application Instructions

Cut Design (DO NOT REVERSE)

Apply transfer tape

Apply to item

Allow 24 Hours before washing

All our HTV is certified to OEKO TEX Standard 100 Class 1

Product class I: Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)

Weight 0.030 kg
Dimensions 30 × 22 × .030 cm
Rainbow

Horizontal Blended Full Rainbow

Vinyl Type

HTV, Self Adhesive

Reviews

There are no reviews yet.

Be the first to review “Horizontal Blended Full Rainbow Printed”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This