PU plotter cut heat seal material with high thickness glitters and adhesive polyester backing.
Average film thickness before application: 380 micron.
Siser Glitter – Neon Green
£2.70 – £9.50
Description
Attractive Designs with Eye Catching Sparkle!
Bling out plain designs for maximum appeal with the best Glitter HTV on the market! Available in over 30 vibrant colors, Glitter contains maximum sparkle without shedding any glitter flakes. Perfect for dance and cheer teams and anywhere you just need a little extra sparkle. Kids of all ages love the shimmer and pop, and since it’s CPSIA Certified it’s safe to apply on kids clothing. If you currently own a sublimation system, or are thinking of getting into that sector, you can also sublimate directly onto white Siser Glitter for awesome full-color looks with all the bling of Glitter! Watch the video on how to sublimate Glitter
***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.
Media should be loaded in your machine with the dull side uppermost.
MIRROR YOUR DESIGN
HTV Cutting Settings
| Cricut: | Silhouette Cameo: | Scan N Cut: |
| Blade: Standard Setting: Iron On |
Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 |
Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
| Roland GS/GX-24: | Graphtec: | MH, SC2, LP3, and Titan 1: | Titan 2 & 3: |
| Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s |
Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
Self Adhesive Cutting Settings
| Cricut: | Silhouette Cameo: | Scan N Cut: |
| Blade: Standard Setting: Vinyl |
Blade: Standard, 2-3 Material: Vinyl Speed: 7 Force: 5 |
Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 2 |
| Roland GS/GX-24: | Graphtec: | MH, SC2, LP3, and Titan 1: | Titan 2 & 3: |
| Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s |
Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Stripflock® Pro Application Instructions
Applies To:
• 100% cotton
• Poly/cotton blends
• 100% polyester
| Application instructions (home iron) DO NOT USE STEAM • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold • Cover and reheat for 2-3 seconds |
Laundering:
• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach
The product is REACH compliant
This HTV is certified to OEKO-TEX Standard 100 Class 1
Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)
The product is certified VeganOK
Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | A4, Metre, Midi Roll, Mini Roll |
