Watercolour 2

£2.50£4.00

Our Printed Patterns are the wow factor you’re looking for! These pre-printed patterns eliminate the need for layering multiple solid colours, therefore eliminating extra weight on the garment! Available in many styles ranging from classic to cool, there’s bound to be a pattern that’s perfect for your next project. These sheets were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut in the positive (do not mirror) with the pattern facing up, weed away the excess from the static carrier, and mask with TTD EasyMask and a squeegee. After heat application, the mask releases quick and easy while still warm. Mix and match patterns with other types of Siser HTV for extraordinary styles. Just be sure to keep pattern layer as the top layer for best results. With a semi-gloss finish and soft hand, our printed patterns are the star of the show even when applied with a home iron!

Patterns are printed on Siser Colorprint PU, 80 Microns / 3.1 Mils and are a PU composition.

SKU: 3010 Category:

Description

Sheet size: A4

Custom Printed Design
Please note as this is custom printed it falls outside of our same day dispatch service as minimum of 12hrs is required for the print to dry to prevent shrinkage, these items will be dispatched the next working day.

***Special Note*** Please allow for slight colour variations between pictures and actual products. Computer monitors may display colour differently. If you have any concerns, please contact us before purchasing.

An Application Tape is required for this product, we sell a number of application tapes all can be reused and have carriers on the back, just replace after each use to get the most from each piece

Media should be loaded in your machine with the printed side uppermost.

DO NOT MIRROR YOUR DESIGN

HTV Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Iron On
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Self Adhesive Cutting Settings

Cricut: Silhouette Cameo: Scan N Cut:
Blade: Standard
Setting: Vinyl
Blade: Standard, 2-3
Material: Vinyl
Speed: 7
Force: 5
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24: Graphtec: MH, SC2, LP3, and Titan 1: Titan 2 & 3:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

HTV Application Instructions

A sheet of TTD EASY MASK will be required to transfer your design to your garment. (these are reusable and can be purchased separately)

Applies To:

• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
• Lycra®/spandex

Application instructions (home iron)
DO NOT USE STEAM
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Weed excess material
• Mask with TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds
Self Adhesive Application Instructions

Cut Design (DO NOT REVERSE)

Apply transfer tape

Apply to item

Allow 24 Hours before washing

HTV

Laundering:

• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean or bleach

Self Adhesive

Washing:

• Wait 24 hours before 1st wash
• Hand wash only with mild detergent
• Dry without hard rubbing
• Do not wash in Dishwasher

The product is REACH compliant

This HTV is certified to OEKO-TEX Standard 100 Class 1

Product class I:
Articles for babies and toddlers up to 3 years of age (underwear, rompers, clothing, bed linen, terry products etc.)

The product is certified VeganOK

Products compliant with the VEGANOK Ethical Regulations are recognizable as they
ALWAYS carry the VEGANOK trademark

Weight 0.03 kg
Dimensions 31 × 22 × 0.03 cm
Vinyl Type

HTV, Self Adhesive

Watercolours

Water Colour 2

Go to Top